Cosmetic scrub, also known as exfoliating scrub, is a product used to remove dead skin cells and other impurities from the surface of the skin. Scrubs typically contain abrasive particles, such as sugar, salt, or ground nuts, which help to loosen and remove the dead skin cells. In addition to exfoliating the skin, cosmetic scrubs can also help to improve circulation and leave the skin feeling smooth and refreshed. While some people use cosmetic scrubs as part of their regular skincare routine, they are not recommended for use on the face more than once or twice a week, as overuse can damage the skin.
Cosmetic scrub as a cleaning agent – when and how it can be used for cleaning fabrics and other products. A scrub is a cosmetic product that contains a mild abrasive. In addition to its direct purpose, the scrub can also be used to clean any surfaces of unstable dirt.
What is a cosmetic scrub?
A cosmetic scrub is a skincare product that is used to exfoliate the skin. It typically contains abrasive particles, such as sugar, salt, or ground nuts, which help to loosen and remove dead skin cells and other impurities from the surface of the skin. In addition to exfoliating the skin, cosmetic scrubs can also help to improve circulation and leave the skin feeling smooth and refreshed. While some people use cosmetic scrubs as part of their regular skincare routine, they are not recommended for use on the face more than once or twice a week, as overuse can damage the skin.
The Cosmetic scrub is suitable for the following purposes:
Cleaning the fabric from unstable dirt:
- of food origin
- colorants
- cosmetic products
- emulsion paint
Removing stubborn odors:
- alcohol consumption
- of gasoline
- cigarette ash
- sweat
- urine
Cleaning the fabric from unstable dirt
- Product composition: scrub, cleaning items (cotton swabs, napkins, rags, etc.), water, hand wash products.
- Step-by-step instructions: apply a small amount of scrub to a fresh stain from any contaminant. The stain is mechanically removed. To do this, it is erased by mechanical action on the surface of the material. The main thing, in this case, is that the cleaning goes from the edges of the stain to the center. In this way, the contamination will be removed, and the contaminant itself will not be spread from the stain to the entire item of clothing or furniture. After cleaning is done, the remaining stain is manually washed in warm water using laundry soap or hand wash powder.
Removal of materials of biological origin
- Product composition: scrub, cleaning products (swabs, wipes, rags, etc.), water, hand cleaning products.
- Step-by-step instructions: apply a small amount of scrub to the stain from urine, feces, blood, semen, or other biological fluids using a swab, cotton swab, or a piece of rag. The stain is aged for 5-10 minutes. After that, the biological stain is removed from the surface of the tissue. As in the previous case, removal is performed by moving from the edges of the stain to the center, so as not to spread the contamination further. After the stain is removed as much as possible, the surface is washed with warm water with soap or hand wash powder, and then washed and dried.
Polishing of metal surfaces
- Product composition: scrub, clean, or polish products (swabs, cotton swabs, etc.), water.
- Step-by-step instructions: Apply a small amount of scrub to the surface that needs to be polished. With even swab movements, the product is distributed over the surface, which must be cleaned and polished. Polishing is performed. To do this, a swab with a small amount of scrub is forcefully pressed against the surface, and it is wiped. At the same time, the fine abrasive particles that make up the scrub remove traces of scale, dirt, or general tarnishing due to environmental influences.
After the product is polished, it is washed in a large amount of clean and running water in order to remove the remaining scrub from the surface.
The abrasive substances present in the scrub are not so hard as to remove serious dirt. Therefore, in order to seriously clean up contaminated metal objects, you must first remove the contamination using more reliable methods. When applied to metal, this means cleaning with harder abrasives and taking into account the chemical composition of the medium (usually the scrub abrasive is neutral, but sometimes – for example, when using finely ground salt-it can be chemically active).
Removing stubborn odors
- Product composition: scrub, items for applying it (cotton swabs, swabs, rags, etc.), hand wash powder, or laundry soap.
- Step-by-step instructions: small amounts of scrub are applied to the places that are the source of ingrained odors. First of all, it uses products that initially include perfumes and perfumes. The product to be cleaned of odors is aged for at least 15-20 minutes. After that, the scrub is removed from the surface of the cloth to be cleaned. Removal is made from the periphery to the center, so as not to spread the contamination wider.
After the cleaning is done, the traces of the scrub itself on the fabric are washed manually with powder or soap. The washed product is ventilated in the open air so that the remaining foreign odors are naturally eroded.
